diff --git a/docs/product/.gitignore b/docs/product/.gitignore
index 01ccb0b..889f5e0 100644
--- a/docs/product/.gitignore
+++ b/docs/product/.gitignore
@@ -1,4 +1,4 @@
# Build outputs — regenerate with build.py
-tt-datasheet.html
-tt-datasheet.pdf
-.tt-datasheet.chrome.html
+tt-datasheet*.html
+tt-datasheet*.pdf
+.tt-datasheet*.chrome.html
diff --git a/docs/product/assets/archivo.woff2 b/docs/product/assets/archivo.woff2
index a31bef9..70646c6 100644
Binary files a/docs/product/assets/archivo.woff2 and b/docs/product/assets/archivo.woff2 differ
diff --git a/docs/product/assets/bar-texture.png b/docs/product/assets/bar-texture.png
new file mode 100644
index 0000000..d0e8865
Binary files /dev/null and b/docs/product/assets/bar-texture.png differ
diff --git a/docs/product/assets/supporters/WIT.png b/docs/product/assets/supporters/WIT.png
new file mode 100644
index 0000000..3975175
Binary files /dev/null and b/docs/product/assets/supporters/WIT.png differ
diff --git a/docs/product/assets/supporters/chipfoundry.png b/docs/product/assets/supporters/chipfoundry.png
new file mode 100644
index 0000000..abc5882
Binary files /dev/null and b/docs/product/assets/supporters/chipfoundry.png differ
diff --git a/docs/product/assets/supporters/swisschips.png b/docs/product/assets/supporters/swisschips.png
new file mode 100644
index 0000000..4759bef
Binary files /dev/null and b/docs/product/assets/supporters/swisschips.png differ
diff --git a/docs/product/assets/supporters/texplained.jpg b/docs/product/assets/supporters/texplained.jpg
new file mode 100644
index 0000000..e5c5280
Binary files /dev/null and b/docs/product/assets/supporters/texplained.jpg differ
diff --git a/docs/product/assets/supporters/tillitis.png b/docs/product/assets/supporters/tillitis.png
new file mode 100644
index 0000000..b8a280f
Binary files /dev/null and b/docs/product/assets/supporters/tillitis.png differ
diff --git a/docs/product/assets/supporters/waferspace.png b/docs/product/assets/supporters/waferspace.png
new file mode 100644
index 0000000..765e66d
Binary files /dev/null and b/docs/product/assets/supporters/waferspace.png differ
diff --git a/docs/product/build.py b/docs/product/build.py
index 0945681..5402973 100644
--- a/docs/product/build.py
+++ b/docs/product/build.py
@@ -173,6 +173,33 @@ def as_data_uri_payload(path: Path) -> str:
return base64.b64encode(path.read_bytes()).decode()
+def check_glyph_coverage(content: dict, font: Path) -> None:
+ """Warn about characters the embedded font cannot draw.
+
+ The font is subset, so a stray character silently falls back to whatever the
+ renderer has to hand — a different typeface mid-word, or a blank box in the
+ PDF. Needs fontTools; skipped quietly when it isn't installed, since it is
+ not a runtime dependency of the build.
+ """
+ try:
+ from fontTools.ttLib import TTFont
+ except ImportError:
+ return
+
+ covered = set(TTFont(font).getBestCmap())
+ missing: dict[str, str] = {}
+ for path, text in walk_strings(content):
+ for char in text:
+ if ord(char) > 0x20 and ord(char) not in covered:
+ missing.setdefault(char, path)
+
+ for char, path in sorted(missing.items()):
+ logging.warning(
+ f"{path}: U+{ord(char):04X} {char!r} is not in the embedded font "
+ "and will fall back to another typeface"
+ )
+
+
def prepare_supporters(supporters: dict, assets: Path) -> None:
"""Inline each supporter logo and work out its per-item sizing."""
height = supporters.get("logo_height", "8.5mm")
@@ -321,8 +348,14 @@ def main() -> None:
prepare_table(key, content[key])
assets = HERE / "assets"
+ check_glyph_coverage(content, assets / content["assets"]["font"])
content["font_b64"] = as_data_uri_payload(assets / content["assets"]["font"])
content["photo_b64"] = as_data_uri_payload(assets / content["assets"]["photo"])
+
+ texture = content["theme"].get("bar_texture")
+ if texture:
+ content["bar_texture_b64"] = as_data_uri_payload(assets / texture)
+ content["theme"].setdefault("bar_texture_opacity", 0.55)
if "supporters" in content:
prepare_supporters(content["supporters"], assets)
diff --git a/docs/product/datasheet-universities.yaml b/docs/product/datasheet-universities.yaml
new file mode 100644
index 0000000..334b924
--- /dev/null
+++ b/docs/product/datasheet-universities.yaml
@@ -0,0 +1,296 @@
+# ---------------------------------------------------------------------------
+# Tiny Tapeout datasheet — UNIVERSITY EDITION.
+#
+# python3 docs/product/build.py --config docs/product/datasheet-universities.yaml \
+# --out docs/product/tt-datasheet-universities.html --pdf
+#
+# Same template and assets as datasheet.yaml; the difference is audience. This
+# one is written for a department buying for a cohort, so it speaks in "we/our
+# students", leads on per-student cost, and answers procurement and calendar
+# questions an individual buyer never asks. Editing notes are in datasheet.yaml.
+# ---------------------------------------------------------------------------
+
+doc:
+ title: Tiny Tapeout for Universities
+ wordmark: Tiny Tapeout
+ wordmark_sub: ""
+ tag: FOR UNIVERSITIES
+ ref: ""
+ page2_title: Electrical Specifications
+
+theme:
+ brand: "#0c66ab" # header bars and table header rows
+ red: "#ec3013"
+ tag_bg: "#fef244"
+ tag_fg: "#040371"
+ ink: "#141414"
+ ink_mid: "#55545f"
+ ink_faint: "#86858f"
+ ground: "#f2f1f4"
+ rule: "#c9c8d0"
+ rule_hard: "#141414"
+ # Chip-layout texture over the header bars, from the tt-datasheet-artwork repo.
+ # Blank the filename for flat bars; raise/lower the opacity for more or
+ # less texture (0.35 subtle, 0.55 balanced, 0.75 strong).
+ bar_texture: bar-texture.png
+ bar_texture_opacity: 0.55
+ heading_size: 23pt
+ body_size: 8.3pt
+
+assets:
+ photo: demoboard.jpg
+ font: archivo.woff2
+
+# --------------------------------------------------------------------------
+# PAGE 1
+# --------------------------------------------------------------------------
+
+hero:
+ eyebrow: "" # short line above the headline; blank to hide
+ heading: Put your class on silicon from €70 a student
+ body: >-
+ Students submit designs onto regular shuttles with a few clicks. Hundreds of
+ designs are combined into a multi project chip and manufactured on an open
+ source PDK. The cohort shares a set of easy to use demoboards to test their
+ designs.
+ photo_alt: Tiny Tapeout demoboard with a QFN-64 packaged ASIC on a breakout board
+ photo_caption: ""
+
+features:
+ - kicker: 01 · Curriculum
+ title: Teaching material included
+ body: >-
+ Workshops, a digital design guide, HDL templates and worked testbenches,
+ plus open IP to teach from: a RISC-V CPU, an FPGA and an analog FPGA.
+ - kicker: 02 · IT footprint
+ title: Nothing to install
+ body: >-
+ The flow runs in GitHub Actions. Any student laptop with a browser is
+ enough — no lab images, no EDA seats, no licence server.
+ - kicker: 03 · Cohort
+ title: One board serves many
+ body: >-
+ A single demoboard selects any project on the die over USB, so a class
+ shares hardware instead of buying one board per student.
+ - kicker: 04 · Process
+ title: Three PDKs, no NDAs
+ body: >-
+ SkyWater SKY130, IHP sg13g2 and GlobalFoundries gf180mcu — 10+ shuttles a
+ year across the three open-source PDKs.
+ - kicker: 05 · I/O
+ title: 26 pins, plus analog
+ body: >-
+ Clock, reset, 8 dedicated inputs, 8 dedicated outputs and 8 bidirectional
+ pins — plus up to 6 analog pins where the process allows.
+ - kicker: 06 · Flexibility
+ title: Use your own EDA tools
+ body: >-
+ Any toolchain, commercial or open source, as long as the GDS and LEF can
+ be published. Verilog officially supported, VHDL and Chisel by the
+ community.
+
+quotes:
+ heading: "" # blank keeps the quotes as a band with no heading
+ items:
+ - text: >-
+ “Tiny Tapeout has been an exciting game changer for my students and the
+ broader microelectronics community. It helps us attract much-needed new
+ talents into a field that has previously failed to provide highly
+ accessible on-ramps.”
+ name: Prof. Boris Murmann
+ affiliation: Chair, IEEE Solid-State Circuits Society · University of Hawai‘i
+ - text: >-
+ “Tiny Tapeout is genius! It allows students, hobbyists, and
+ professionals to easily create custom silicon circuit blocks, supporting
+ digital, analog, or mixed-signal… indispensable for modern IC design
+ education!”
+ name: Prof. Harald Pretl
+ affiliation: Senior Principal Engineer, Intel · JKU Linz
+
+pricing:
+ heading: What a cohort costs
+ note: ""
+ columns:
+ - {label: Item, width: "27%", style: name}
+ - {label: What it buys you}
+ - {label: From, width: "22%", style: price}
+ rows:
+ - ["1 tile",
+ "Roughly 1,000 standard cells — one design, one student. Dimensions vary by PDK, see page 2.",
+ "€70"]
+ - ["Analog pin",
+ "Multiplexed analog pad access for mixed signal work. Minimum project size of 2 tiles applies.",
+ "€100 / pin, max 6"]
+ - ["Demoboard PCB",
+ "Packaged chip on an RP2350 demoboard. Any board can select any project, so a class shares them.",
+ "€300 each"]
+ - ["Postage & packing",
+ "Flat rate worldwide, charged once per demoboard.",
+ "€15"]
+ footnote: >-
+ A class of 25, each submitting one design, sharing 5 demoboards for
+ testing: 25 tiles (€1,750) + 5 boards (€1,500) + postage (5 × €15) = €3,325,
+ or €133 a student. Every extra student after that is €70. Orders over
+ €10,000 receive 10% off. Price your own cohort at
+ app.tinytapeout.com/calculator,
+ or email
+ education@tinytapeout.com
+ for a quote.
+
+faq:
+ heading: What departments ask
+ note: FULL FAQ AT TINYTAPEOUT.COM/FAQ
+ items:
+ - q: How does this fit our academic calendar?
+ a: >-
+ Fabrication takes 6–9 months and delivery up to a year, so a design
+ submitted in one academic year returns in the next. That return becomes
+ a bring-up module in its own right: students test parts documented by
+ their peers, where gaps in testing and documentation show up
+ immediately.
+ - q: How do we pay?
+ a: >-
+ We invoice institutions directly, accept purchase orders and issue
+ written quotes your finance office can approve against. VAT invoices are
+ available.
+ - q: Do our students need prior experience?
+ a: >-
+ No. The guided workshops take a beginner from logic gates to a submitted
+ design, and thousands of past projects are public to learn from.
+ - q: Who owns the work?
+ a: >-
+ Every design is published publicly under Apache-2.0, so Tiny Tapeout
+ does not suit confidential or commercially sensitive research. Full
+ terms at tinytapeout.com/terms.
+
+institutions:
+ # US-only for this sheet. The individual datasheet keeps the full
+ # international list; the non-US entries are still there if you need them.
+ label: Already teaching with Tiny Tapeout
+ items:
+ - Carnegie Mellon University
+ - New York University
+ - UC Santa Cruz
+ - UC San Diego
+ - San Jose State University
+ - Oklahoma State University
+
+contact:
+ label: Talk to us
+ lines:
+ - education@tinytapeout.com
+ - Quotes · purchase orders · invoicing
+
+# --------------------------------------------------------------------------
+# PAGE 2 — identical specifications to the individual sheet, with procurement
+# added to the ordering table.
+# --------------------------------------------------------------------------
+
+process:
+ heading: Process & fabrication
+ note: TILE DIMENSIONS PER PDK
+ columns:
+ - {label: PDK, width: "19%", style: name}
+ - {label: Foundry, width: "21%"}
+ - {label: Node, width: "20%", style: num}
+ - {label: 1×1 tile area, width: "24%", style: mono}
+ - {label: Analog support}
+ rows:
+ - ["SKY130A", "SkyWater", "130 nm", "161.00 × 111.52 µm", "Full"]
+ - ["ihp-sg13g2", "IHP", "130 nm BiCMOS", "202.08 × 154.98 µm", "Partial"]
+ - ["gf180mcuD", "GlobalFoundries", "180 nm", "346.64 × 160.72 µm", "Partial"]
+ footnote: >-
+ One tile holds approximately 1,000 standard cells. Larger designs are
+ built from multi-tile blocks, up to 8×4 on SKY130A and ihp-sg13g2 and
+ up to 4×4 on gf180mcuD; the sizes available in between differ per PDK.
+ Analog projects require a minimum height of 2 tiles.
+
+ratings:
+ heading: Absolute maximum ratings
+ note: DIGITAL I/O
+ columns:
+ - {label: Parameter, width: "40%", style: name}
+ - {label: Min, width: "13%", style: num}
+ - {label: Typ, width: "13%", style: num}
+ - {label: Max, width: "13%", style: num}
+ - {label: Unit}
+ rows:
+ - ["I/O supply voltage", "1.71", "3.30", "5.50", "V"]
+ - ["Input frequency", "—", "—", "66", "MHz"]
+ - ["Output toggle frequency", "—", "—", "33", "MHz"]
+ - ["Output drive strength, source/sink", "—", "4", "—", "mA"]
+ - ["Demoboard clock generator", "1", "—", "66.5 M", "Hz"]
+ - ["Pad-to-tile round-trip latency", "—", "—", "20", "ns"]
+ - ["Clock insertion delay, pad to logic", "—", "—", "10", "ns"]
+ - ["Pin-to-pin latency variance", "—", "—", "2", "ns"]
+ footnote: >-
+ Characterised on SKY130A using the sky130_ef_io_gpiov2_pad cell;
+ ratings differ per PDK. Inputs are not 5 V tolerant despite the supply
+ range. Full per-process figures at
+ tinytapeout.com/specs.
+
+gpio:
+ heading: GPIO pin map
+ columns:
+ - {label: Signal, width: "34%", style: mono}
+ - {label: Width, width: "14%", style: num center}
+ - {label: Direction, width: "22%"}
+ - {label: Function}
+ rows:
+ - ["clk", "1", "Input", "Clock"]
+ - ["rst_n", "1", "Input", "Reset, active low"]
+ - ["ui_in[7:0]", "8", "Input", "General purpose"]
+ - ["uo_out[7:0]", "8", "Output", "General purpose"]
+ - ["uio[7:0]", "8", "Bidirectional", "Per-pin direction control"]
+ linkline: >-
+ 26 I/O PINS TOTAL ·
+ TINYTAPEOUT.COM/SPECS/GPIO
+
+analog:
+ heading: Analog I/O
+ note: OPTIONAL
+ columns:
+ - {label: Parameter, style: name}
+ - {label: Value, width: "34%", style: mono}
+ rows:
+ - ["Analog pins, maximum", "6 · ua[0:5]"]
+ - ["Series resistance, pad to project", "< 500 Ω"]
+ - ["Parasitic capacitance", "< 5 pF"]
+ - ["Current per pin, maximum", "4 mA"]
+ - ["VDPWR digital supply", "1.8 V"]
+ - ["VAPWR analog supply", "3.3 V"]
+ linkline: >-
+ TINYTAPEOUT.COM/SPECS/ANALOG
+
+ordering:
+ heading: Ordering information
+ note: EDUCATION@TINYTAPEOUT.COM
+ headless: true
+ columns:
+ - {width: "27%", style: name}
+ - {}
+ rows:
+ - ["Shuttle cadence",
+ "10+ shuttles per year across the three processes. Check tinytapeout.com/chips for the schedule."]
+ - ["Lead time",
+ "6–9 months in fabrication, then assembly, test and fulfilment."]
+ - ["Payment",
+ "Invoices, purchase orders and written quotes for institutions. VAT invoices available."]
+ - ["Volume discount",
+ "10% off orders over €10,000. Price a cohort at app.tinytapeout.com/calculator, or email us for a quote."]
+ - ["Deliverable",
+ "Silicon area only for remote or shared test, or area plus demoboard kits: packaged chip, RP2350 demoboard and breakout board."]
+ - ["Design tools",
+ "Supplied open-source LibreLane flow running in GitHub Actions, or any commercial or open-source toolchain of your own."]
+ - ["Minimum submission",
+ "GDS + LEF, produced with any tools, in a public repository under Apache-2.0. Your tools must permit publishing them."]
+
+disclaimer:
+ label: Disclaimer
+ body: >-
+ Specifications are indicative and subject to change between shuttles.
+ Electrical characteristics are quoted for the SKY130A process unless stated
+ otherwise — consult tinytapeout.com/specs for the process you intend to use.
+ Every submitted design is published publicly under Apache-2.0. Full terms and
+ conditions of sale are published at
+ tinytapeout.com/terms.
diff --git a/docs/product/datasheet.html.mustache b/docs/product/datasheet.html.mustache
index fa91063..1e779a1 100644
--- a/docs/product/datasheet.html.mustache
+++ b/docs/product/datasheet.html.mustache
@@ -10,7 +10,7 @@
}
:root {
- --navy: {{theme.navy}};
+ --brand: {{theme.brand}};
--red: {{theme.red}};
--tag-bg: {{theme.tag_bg}};
--tag-fg: {{theme.tag_fg}};
@@ -68,15 +68,32 @@ body {
/* ---------- masthead ---------- */
.bar {
- background: var(--navy);
+ background: var(--brand);
color: #fff;
display: flex;
align-items: center;
gap: 5mm;
padding: 4.2mm 12mm;
flex: none;
+ position: relative;
+ overflow: hidden;
}
+/* Chip-layout texture over the bar. The traces are black, so they darken the
+ bar and push contrast with the white type up rather than down. */
+{{#bar_texture_b64}}
+.bar::before {
+ content: "";
+ position: absolute;
+ inset: 0;
+ background: url(data:image/png;base64,{{&bar_texture_b64}}) center / cover no-repeat;
+ opacity: {{theme.bar_texture_opacity}};
+ pointer-events: none;
+}
+
+.bar > * { position: relative; }
+{{/bar_texture_b64}}
+
.bar__logo { width: 11mm; height: 11mm; flex: none; display: block; }
.bar__word {
@@ -86,7 +103,7 @@ body {
line-height: 1;
}
-.bar__word span { display: block; font-size: var(--t-micro); font-weight: 600; letter-spacing: 0.14em; color: #9a99d6; margin-top: 1.1mm; }
+.bar__word span { display: block; font-size: var(--t-micro); font-weight: 600; letter-spacing: 0.14em; color: rgba(255, 255, 255, 0.72); margin-top: 1.1mm; }
.bar__tag {
margin-left: auto;
@@ -98,7 +115,7 @@ body {
padding: 1.4mm 3mm;
}
-.bar__ref { font-size: var(--t-micro); font-weight: 500; letter-spacing: 0.1em; color: #9a99d6; font-variant-numeric: tabular-nums; }
+.bar__ref { font-size: var(--t-micro); font-weight: 500; letter-spacing: 0.1em; color: rgba(255, 255, 255, 0.72); font-variant-numeric: tabular-nums; }
.bar--p2 .bar__title { margin-left: auto; font-size: var(--t-fine); font-weight: 700; letter-spacing: 0.14em; text-transform: uppercase; }
@@ -174,7 +191,19 @@ body {
.hero figure { margin: 0; display: flex; flex-direction: column; }
-.hero img { width: 100%; height: 44mm; object-fit: cover; display: block; }
+/* The photo fills whatever height the text column sets, so the two hero columns
+ always end level. The image is taken out of flow so its intrinsic height
+ can't drive the grid row; the frame then stretches to whatever the text needs. */
+.hero__frame { flex: 1 1 auto; min-height: 0; position: relative; }
+
+.hero__frame img {
+ position: absolute;
+ inset: 0;
+ width: 100%;
+ height: 100%;
+ object-fit: cover;
+ display: block;
+}
.hero figcaption {
font-size: var(--t-micro);
@@ -210,7 +239,7 @@ body {
table { width: 100%; border-collapse: collapse; }
th {
- background: var(--navy);
+ background: var(--brand);
color: #fff;
font-size: var(--t-micro);
font-weight: 600;
@@ -279,6 +308,35 @@ tbody tr:last-child td { border-bottom: 0; }
.faq p { margin: 0; font-size: var(--t-fine); line-height: 1.36; color: var(--ink-mid); }
+/* ---------- pull quotes ---------- */
+
+.quotes { display: grid; grid-template-columns: repeat(auto-fit, minmax(0, 1fr)); gap: 7mm; }
+
+.quotes blockquote {
+ margin: 0;
+ border-left: 2px solid var(--red);
+ padding-left: 3.4mm;
+}
+
+.quotes p {
+ margin: 0;
+ font-size: var(--t-body);
+ line-height: 1.34;
+ font-style: italic;
+ max-width: 155mm;
+}
+
+/* Not uppercased: a name plus a long affiliation is hard to read in caps. */
+.quotes cite {
+ display: block;
+ margin-top: 1.6mm;
+ font-size: var(--t-fine);
+ font-style: normal;
+ color: var(--ink-faint);
+}
+
+.quotes cite b { color: var(--ink); font-weight: 700; }
+
/* ---------- page 2 two-column band ---------- */
.band { display: grid; grid-template-columns: 1.05fr 1fr; gap: 8mm; }
@@ -340,6 +398,13 @@ a:focus-visible { outline: 2px solid var(--red); outline-offset: 2px; }
.disclaimer { margin-top: 1.8mm; font-size: var(--t-micro); line-height: 1.45; color: var(--ink-mid); max-width: 150mm; }
+/* Optional call-to-action beside the institution list on page 1. */
+.contact { flex: none; border-left: 2px solid var(--rule-hard); padding-left: 5mm; align-self: stretch; }
+
+.contact__lines { margin-top: 1.8mm; font-size: var(--t-fine); line-height: 1.5; }
+.contact__lines span { display: block; font-weight: 600; white-space: nowrap; }
+.contact__lines span:first-child { font-weight: 700; color: var(--red); }
+
.pageno {
flex: none;
font-size: var(--t-h2);
@@ -361,7 +426,7 @@ a:focus-visible { outline: 2px solid var(--red); outline-offset: 2px; }
.deck { display: block; gap: 0; padding: 0; }
.sheet { break-after: page; page-break-after: always; box-shadow: none; }
.sheet:last-child { break-after: auto; page-break-after: auto; }
- th, .bar, .bar__tag, .zebra tbody tr:nth-child(odd) td {
+ th, .bar, .bar::before, .bar__tag, .zebra tbody tr:nth-child(odd) td {
-webkit-print-color-adjust: exact;
print-color-adjust: exact;
}
@@ -388,12 +453,12 @@ a:focus-visible { outline: 2px solid var(--red); outline-offset: 2px; }
diff --git a/docs/product/datasheet.yaml b/docs/product/datasheet.yaml
index 5f298d6..7b9d1c6 100644
--- a/docs/product/datasheet.yaml
+++ b/docs/product/datasheet.yaml
@@ -31,11 +31,11 @@ doc:
# Colours and the two page-level type sizes. Everything else scales from these.
theme:
- navy: "#040371" # header bars and table header rows
+ brand: "#0c66ab" # header bars and table header rows
red: "#ec3013" # accent: labels, rules, prices
# DATASHEET tag in the header bar. Official Tiny Tapeout brand colours:
# yellow #fef244 · cyan #3dfef7 · hot pink #f82381 · pink #fc9f9f · blue #040371
- # Set tag_fg to navy for the light colours, #ffffff for hot pink.
+ # Set tag_fg to a dark colour for the light tags, #ffffff for hot pink.
tag_bg: "#fef244"
tag_fg: "#040371"
ink: "#141414" # body text
@@ -44,6 +44,11 @@ theme:
ground: "#f2f1f4" # zebra stripe on tables
rule: "#c9c8d0" # thin rules
rule_hard: "#141414" # 2px section rules
+ # Chip-layout texture over the header bars, from the tt-datasheet-artwork repo.
+ # Blank the filename for flat bars; raise/lower the opacity for more or
+ # less texture (0.35 subtle, 0.55 balanced, 0.75 strong).
+ bar_texture: bar-texture.png
+ bar_texture_opacity: 0.55
heading_size: 30pt # page 1 headline
body_size: 8.3pt # feature and FAQ body text
@@ -99,8 +104,8 @@ features:
- kicker: 04 · Process
title: Three PDKs
body: >-
- SkyWater SKY130, IHP sg13g2 and GlobalFoundries gf180mcu. Open-source PDKs
- running multiple times per year with no NDAs to sign.
+ SkyWater SKY130, IHP sg13g2 and GlobalFoundries gf180mcu. Open-source PDKs,
+ 10+ shuttles per year, no NDAs to sign.
- kicker: 05 · Hardware
title: Demoboard available
body: >-
@@ -109,8 +114,9 @@ features:
- kicker: 06 · Flexibility
title: Bring your own flow
body: >-
- Harden with the supplied open-source LibreLane flow, or use your own tools
- entirely — the minimum submission is GDS + LEF.
+ Harden with the supplied open-source LibreLane flow, or use any tools you
+ like — commercial or open source — as long as the resulting GDS and LEF
+ can be published.
pricing:
heading: Pricing
@@ -130,7 +136,7 @@ pricing:
"Optional add-on: packaged chip on an RP2350 powered demoboard.",
"€300"]
- ["Postage & packing",
- "Flat rate worldwide, charged once per order.",
+ "Flat rate worldwide, charged once per demoboard.",
"€15"]
footnote: >-
The €385 headline is one tile (€70) plus a demoboard (€300) plus postage
@@ -272,7 +278,7 @@ ordering:
- {}
rows:
- ["Shuttle cadence",
- "Several shuttles per year across the three processes. Check tinytapeout.com/chips for the schedule."]
+ "10+ shuttles per year across the three processes. Check tinytapeout.com/chips for the schedule."]
- ["Lead time",
"6–9 months in fabrication, then assembly, test and fulfilment."]
- ["Volume discount",
@@ -280,9 +286,9 @@ ordering:
- ["Deliverable",
"Silicon area only for remote or shared test, or area plus the demoboard kit: packaged chip, RP2350 demoboard and breakout board."]
- ["Design tools",
- "Supplied open-source LibreLane flow running in GitHub Actions, or any toolchain of your own."]
+ "Supplied open-source LibreLane flow running in GitHub Actions, or any commercial or open-source toolchain of your own."]
- ["Minimum submission",
- "GDS + LEF in a public repository, licensed Apache-2.0."]
+ "GDS + LEF, produced with any tools, in a public repository under Apache-2.0. Your tools must permit publishing them."]
disclaimer:
label: Disclaimer
+