mirror of
https://github.com/TinyTapeout/tt-support-tools.git
synced 2026-11-03 04:36:09 +01:00
Kristaps Jurkans
904755cae3
This is determined by looking at the `pdk` key in the config. If `pdk` doesn't exist, `id` will be used (assuming that the structure of the shuttle ID follows ttX where X=[sky, ihp, gf]). If any part fails, it will fall back to `openframe_sky130`. The pinout can also be manually controlled by setting the `datasheet_config.pinout` key in the shuttle config, and that will be used verbatim. Note that `datasheet_config.pinout` is not checked, so it *must* be exact, otherwise it will cause the datasheet build to fail.
Tiny Tapeout tools
Tools used mostly by the Tiny Tapeout GitHub Actions
Setup
pip install -r requirements.txt
pre-commit install
Documentation
- checks that basic fields are present in the info.yaml
- create a PDF data sheet for this one design
- create SVG and PNG renders of the project's GDS
Reports
- routing & utilisation
- yosys warnings
- standard cell usage and summary
Configuration
- creates a little TCL shim that tells OpenLane where the source is and the name of the top module
- makes sure the top module is not called 'top'
- if you have OpenLane installed locally, then you can harden the design with --harden